Hydrophilic functionalization of syndiotactic polystyrene via a combination of electrophilic bromination and Suzuki–Miyaura reaction

Postfunctionalization of high‐molecular‐weight syndiotactic polystyrene (sPS) was achieved via combination of electrophilic bromination at the para‐position of the polymer aromatic ring and subsequent Suzuki–Miyaura cross‐coupling reactions with functionalized phenylboronic acids. The concentration of brominated styrene repeating unit in sPS was conveniently controlled by changing the ratio of added bromine relative to the polymer repeating unit. Brominated sPS (8.5 mol %) was converted quantitatively to other polar functional groups via Suzuki–Miyaura cross‐coupling reactions with various functional group‐substituted phenylboronic acids. The surface properties of functionalized sPS were studied by measuring water contact angles. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4335–4343, 2010     

Conjugated copolymers comprised cyanophenyl‐substituted spirobifluorene and tricarbazole‐triphenylamine repeat units for blue‐light‐emitting diodes

A series of conjugated blue‐light‐emitting copolymers, PTC‐1 , PTC‐2 , and PTC‐3, comprised different ratios of electron‐withdrawing segments (spirobifluorene substituted with cyanophenyl groups) and electron‐donating segments (tricarbazole‐triphenylamines), has been synthesized. The structures of these polymers were characterized and their thermal, photophysical, electrochemical, and electroluminescence properties were measured. Incorporation of rigid spirobifluorene units into the copolymers led to blue‐shifted absorption peaks in dilute toluene solution. Cyclic voltammetric measurement indicated the bandgaps of the polymers were in the range of 2.77–2.94 eV. It was found that increasing cyanophenyl‐spirobifluorene content in the polymer backbone lowered both the HOMO and LUMO energy levels of the copolymers, which was beneficial for electron injection/transporting in the polymer layer of the device. OLED device evaluation indicated that all the polymers emitted sky blue to deep blue light when the pure polymers were used as the emissive layers in the devices with a configuration of ITO/PEDOT:PSS/polymers/CsF/Ca/Al. The devices have been optimized by doping 30 wt % PBD into the polymer layers. Among the doped devices, PTC‐2 showed the best performance with the turn‐on voltage of 3.0 V, maximum brightness of 7257 cd/m², maximum current efficiency of 1.76 cd/A, and CIE coordinates of (0.15, 0.14). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 292–301, 2010     

Hierarchical structure in polymer‐based drug delivery systems as probed by calorimetric measurements

Thermoporosimetry (TPM), a differential scanning calorimetry technique that relies on the shift of transition temperatures caused by the confinement of liquids, was applied to elucidate the complex morphology of drug‐loaded polymeric microcapsules prepared by the emulsion solvent evaporation method. For the very first time, TPM has been applied simultaneously with two liquids as structural probes. It was found that Miglyol, which dissolves the selected drug (Ibuprofen), is confined inside vesicles having a mean radius of 26.3 nm, whereas water, which is the continuous phase, is trapped inside a swollen polymeric network of Eudragit with an average mesh radius of 1.7 nm. A proposed hierarchical structure is given, which predicts that Eudragit microcapsules are formed from a collection of inert oil vesicles partitioned by polymeric Eudragit membranes swollen by water. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1939–1945, 2010     

Nanostructured thermoresponsive quantum dot/PNIPAM assemblies

Synthesis, characterization, and applications of novel thermoresponsive polymeric coatings for quantum dots (QDs) are presented. Comb-copolymers featuring hydrophobic alkyl groups, carboxylic groups and poly(N-isopropylacrylamide) (PNIPAM) side chains with molar masses ranging from 1000 g/mol to 25,400 g/mol were obtained. The amphiphilic comb-copolymers were shown to efficiently transfer the QDs to aqueous media. The PNIPAM-coated QD materials display a lower critical solution temperature (LCST). The absorbance, luminescence emission, size of the assemblies, and electrophoretic mobility were followed as a function of temperature and the reversibility of the temperature induced changes is demonstrated by cyclic heating and cooling.     

Mechanistic discussion of cationic crosslinking copolymerizations of 1,2‐epoxycyclohexane with diepoxide crosslinkers accompanied by intramolecular and intermolecular chain transfer reactions

Our previous mechanistic discussion of the free‐radical crosslinking monoallyl/diallyl copolymerizations was extended to the cationic crosslinking monoepoxide/diepoxide copolymerizations, typically including 1,2‐epoxycyclohexane (ECH) as a monoepoxide and bis[3,4‐epoxycyclohexylmethyl] adipate (BECHMA) as a diepoxide crosslinker. In the cationic polymerization, oligomer is usually obtained because of the occurrence of characteristic chain‐forming reactions. Therefore, cationic crosslinking monoepoxide/diepoxide copolymerizations could be in the category of the network formation through free‐radical crosslinking monoallyl/diallyl copolymerizations. Thus, the gelation behavior was discussed by comparing the actual gel points with the theoretical ones; the greatly delayed gelation from theory was observed. Then, the resulting network polymer precursors (NPPs) were characterized by SEC‐MALLS‐viscometry to clarify the cationic crosslinking ECH/BECHMA copolymerization mechanism. Notably, the correlation lines of molecular weight versus elution volume were specific for the NPPs obtained at a high conversion close to the gel point as compared with those obtained by the free‐radical crosslinking monoallyl/diallyl copolymerization. This may be ascribed to the occurrence of intramolecular and intermolecular chain transfer reactions characteristic of cationic polymerization; the chain transfer reactions involve the intramolecular and intermolecular nucleophilic attack of ether oxygen or terminal hydroxyl oxygen in the NPPs to a terminal growing cation that leads to the formation of not only the loop‐ but also the crosslink‐structures containing NPPs, providing fragile ultrahigh‐molecular‐weight NPP in the SEC columns. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Facilitating polymer conjugation via combination of RAFT polymerization and activated ester chemistry

The synthesis of block copolymers via polymer conjugation of well‐defined building blocks offers excellent control over the structures obtained, but often several coupling strategies need to be explored to find an efficient one depending on the building blocks. To facilitate the synthesis of polymers with adjustable functional end‐groups for polymer conjugation, we report on the combination of activated ester chemistry with RAFT polymerization using a chain transfer agent (CTA) with a pentafluorophenyl ester (PFP‐CTA), which allows for flexible functionalization of either the CTA prior to polymerization or the obtained polymer after polymerization. Different polymethacrylates, namely PMMA, P(t‐BuMA) and PDEGMEMA, were synthesized with an alkyne‐CTA obtained from the aminolysis of the PFP‐CTA with propargylamine, and the successful incorporation of the alkyne moiety could be shown via ¹H and ¹³C NMR spectroscopy and MALDI TOF MS. Further, the reactive α‐end‐groups of polymers synthesized using the unmodified PFP‐CTA could be converted into azide and alkyne end‐groups after polymerization, and the high functionalization efficiencies could be demonstrated via successful coupling of the resulting polymers via CuAAC. Thus, the PFP‐CTA allows for high combinatory flexibility in polymer synthesis facilitating polymer conjugation as useful method for the synthesis of block copolymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

A hyperbranched,rotaxane‐type mechanically interlocked polymer

Based on the dibenzo‐24‐crown‐8/1,2‐bis(pyridinium)ethane recognition motif, a hyperbranched mechanically interlocked polymer was prepared by polyesterification of an easily available dynamic trifunctional AB₂ pseudorotaxane monomer. It was characterized by various techniques including ¹H NMR, COSY, NOESY, GPC, viscosity, TGA, dynamic laser light scattering, AFM, and SEM. Its GPC M_n was determined to be 191 kDa with polydispersity 1.7 and its hydrodynamic diameter in a dilute solution in acetone was about 70 nm. This measured M_n value corresponds to about 93 repeating units. The study reported here presents not only a new polymer topology but also a novel and convenient way to prepare mechanically interlocked polymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4067–4073, 2010     

Multiscale Lagrangian fluid dynamics simulation for polymeric fluid

We have developed a simulation technique of multiscale Lagrangian fluid dynamics to tackle hierarchical problems relating to historical dependency of polymeric fluid. We investigate flow dynamics of dilute polymeric fluid by using the multiscale simulation approach incorporating Lagrangian particle fluid dynamics technique (the modified smoothed particle hydrodynamics) with stochastic coarse‐grained polymer simulators (the dumbbell model). We have confirmed that our approach is well in agreement with the macroscopic results obtained by a constitutive equation corresponding to the dumbbell model, and observed that microscopic thermal fluctuation appears in macroscopic fluid dynamics as dispersion phenomena. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 886–893, 2010